HC9120 Hydrocarbon C9 Resin is made by C9 fraction, through catalytic-polymerization. HC9120 Hydrocarbon C9 Resin is a granular solid with the color of light yellow to light brown, it has the properties of good solubility, mutual solubility, water resistance, insulation and very good chemical stability over acid and alkali, and good adhesive strength and lower heat conduction.
Ethyl silicate Crosile Si40 is a concentrated form for obtaining usable silica. It is a partially hydrolyzed mixture of monomers, dimers, trimers, higher polymers and cyclic polysilicates.
Crosile® 7697 Anchorage Additive is a silicone oil adhesion additive that is a reactive silane mixture, used to improve the wear resistance of silicone release agents or silicone, and the adhesion to the substrate.
Diaminofunctional Silane Polymer Crosile® 5246 is used in adhesives, sealants and coatings to improve the adhesion of amino reactive resins to inorganic surfaces, plastic surfaces and inorganic fillers.
Crosile® AK200 has a more obvious effect on adhesion enhancement under acidic conditions (pH=4 or so). The epoxy silane Crosile® AK200 is stable in water and does not affect performance if stored for a long time.
Diaminofunctional Silane Crosile® 5246 is used in adhesives, sealants and coatings to improve the adhesion of amino reactive resins to inorganic surfaces, plastic surfaces and inorganic fillers.
Ethylene propylene diene monomer EPDM is put into extensive application in the field of rubber plastics products and lubricant improver. EPDM is made of polymer with ethene and 1-propene.
