Isocyanate propyl triethoxy silane (IPTS) is a silane with functional group: isocyanate, it can be used as crosslink agent and adhesion promoter in adhesives and sealants. 

White granular Precipitated Silica Felcosil-195GR form with low dust, it can be dissolved by NaOH,HF. Other kinds of acid, water and solvents cannot dissolve the product.

HT 9100 Petroleum Hydrocarbon Resin C9 HT Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT 9100 is a transparent granular solid with the color of yellow to light brown. HT 9100 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

HC52100 C5 Resin is a low molecular weight aliphatic hydrocarbon resin that has been designed for hot melt road marking systems. This resin shows outstanding affinity for pigments and superior processability in the hot melt road marking application. It will remain stable all-round the year by adding additives.  

 Hydrogenated Hydrocarbon C9 Resin is water white thermoplastic resin obtained from polymerizing of aromatic and hydrogenation.

Resistance to high temperature, no combustion, goodinsulation, odourless properties. 

ECOPOWER Crosile1100 (3-Aminopropyl)trimethoxysilane (APTMS) is an aminosilane mainly used as a silane coupling agent for surface modification of various nanomaterials. APTMS-based films form thermally stable layers on different substrates.

Crosile®75 (Bis(3-triethoxysilylpropyl)disulfide) TESPD is a bifunction polysulfidic organosilane and has been widely in the rubber industry. Crosile®75 TESPD is used to improve the reinforcing capability of fillers with silanol group on the their surface,and also as an integral part of curing systems to improve cross-linking network properties. Compared to the Crosile®69 (Bis(3-triethoxysilylpropyl)tetrasulfide), Crosile®75 has a higher temperature stability and therefore allows higher mixing temperatures. Crosile®75 imparts greater tensile strength, higher module, reduced compression set, increased abrasion. resistance and optimized dynamic properties.