WhatsAppWhatsapp us

Rosin Ester R 100 For Hot melt Road Marking Line Paint

R 100 rosin ester are friendly environmental, which is made of the natural colophony tree with light color and low odor.

  • Item NO.:

    R 100
  • EINECS No.:

    N/A
  • CAS No.:

    N/A
  • Color Gardener:

    Light Yellow
  • Property:

    ECOPOWER Gum Rosin R-100 specially used as the link of traffic marking painting, which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. They also have good resistance to yellowing and ageing. It is suitable for all kinds of bitumen road surface and cement road surface. Beside with light color and moderate softening point, the resin is also improved the composition of light stability agent, effective actualization for light screen, UV absorption.

Rosin Ester R 100 for Hot melt Road Marking line Paint

 

Product Name 

Resin for Hot Melt Road-Marking, Rosin Ester, Gum Rosin Ester.

 

Chemical Properties

Rosin ester R 100 are friendly environmental, which is made of the natural colophony tree with light color and low odor.

Rosin ester R 100 is a biobased binder resin designed for high-performance thermoplastic road marking applications.

The product has low initial color, which remains low even after aging.

The color advantage enables formulators to optimize titanium dioxide (TiO2) for either enhanced brightness or lower cost in use.

The binder rosin ester resin R 100 offers excellent thermal stability for consistent color, softening point, mass retention and viscosity.

These application properties help formulators to ensure that the applied road markings paint stay in specification from the beginning to the end of the striping job. Rosin Ester R100 is a pine-based raw materials, the product allows formulators to improve road marking performance while lessening environmental impact.

 

Specifications

Test Items

Type: R 100

Appearance & Color

2-4 light yellow granular

Softening Point (R&B) ℃

97-103

Acid value (mg KOH/g)

≤20

Solubility in Benzene (1:1)

Clear

 

Rosin Ester R 100 Advantages

  • Low Initial Color
  • Excellent Thermal Stability
  • Superior Viscosity Stability
  • Good Color Consistency
  • Stable Softening Point
  • High Mass Retention
  • Adhesion to Variety of Substrates
  • High content Biobased

 

Rosin Ester R 100 Application:

  • Spray-Applied Thermoplastic
  • Extrusion-Applied Thermoplastic

 

Preformed Road Marking Performance Benefits:

  • Low initial color allows broader use of a sustainable tackifier in applications requiring a low color.
  • Increased thermal stability maintains quality during application.

Rosin Ester R 100 for Hot melt Road Marking line Paint

 

1.Packing: 225kg/ galvanized iron drums or 25kg/bag

2. Storage: Kept in a low temperature, dry and ventilated place, avoid direct sunlight.

3. Shelf life: One year in ventilating, cool and dry area.

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Related Products
ECOPOWER Rosin Ester Resin
Road Marking Paint Rosin ester R105
ECOPOWER R105 rosin ester are friendly environmental,which is made of the natural colophony tree with light color and low odor.
Read More
Disproportionated Rosin
Disproportionate Rosin RC 101
Disproportionated rosin (DPR) is compound of dehydroabie acid and dihydroabtice acid, the DPR is processed through catalytic reaction of gum rosin on proper temperature. In the synthetic rubber industry, DPR is used as emulsifier in the producing of various products including styrene-butadiene rubber, chloroprene rubber, acrylonitrile-butadiene rubber and acrylonitrile-butadiene-styrene rubber. Using DPR as an emulsifier, rubber product will improve in cohesion, and the endurance to heat will increase for 25%. The endurance to both abrasion and laceration of this rubber is better than ordinary styrene-butadiene rubber. The cohesion will be greatly enhanced if blended with natural rubber.
Read More
Crosile69S and Silica
mixture Silane with Silica Crosile® 69S
Crosile® 69s is a mixture of Crosile® 69s silane coupling agent and precipitated silica with the same function as liquid Crosile® 69 but easier to operate. It can improve the physical and mechanical properties of rubber and greatly strengthen tensile strenth, antitearing strenth, abrasion resistance, reduce the permanent deformation and viscosity of gross rubber, improve process property. Suitable polymers include NR, IP, SBR, BR, NBR, EPDM, etc.
Read More
ECOPOWER C9 Hydrogenated Water White Resin
HY 9100 Hydrogenated C9 Resin for HMA HMPSA
C9 Hydrogenated Hydrocarbon Resin is water white thermoplastic resin obtained from polymerizing of aromatic and hydrogenation.
Read More
ECOPOWER C9 Hydrogenated Water White Resin
HY9100 Hydrogenated Water White C9 Resin in Solvent Base Pressure Sensitive Adhesive
HY-9100 Hydrogenated Water White C9 Resin is produced through the process of refinement, isolation, polymerization and molding with the raw material of hydrocarbon resin C9, which is the by product from the ethylene fragment. HY9100 is white granular, aromatic resin, which is easily soluble in organic solvents such as benzene and toluene etc.
Read More
ECOPOWER Bis-[3-(triethoxysilyl)propyl]tetrasulfide and carbon black
Carbon black mix with Silane Crosile® 69C for Tire industry
Crosile® 69C it is a mixture of Crosile® 69C silane coupling agent and carbon black with the same function as Crosile® 69C but easier to operate. Crosile® 69 can improve the physical and mechanical properties of rubber and greatly strengthen tensile strenth, antitearing strenth, abrasion resistance, reduce the permanent deformation and viscosity of gross rubber, improve process property. The suitable polymer include NR,IP,SBR,BR,NBR,EPDM, etc.  
Read More
Chlorosulfonated Polyethylene CSM rubber Hypalon Rubber
Chlorosulfonated Polyethylene CSM 30 in Anti-corrosion Paint
The chemical structure of Chlorosulfonated Polyethylene is a fully saturated backbone. CSM Rubber has excellent ozone resistance, atmospheric aging resistance chemical resistance, ionizing radiation resistance and color stability, good mechanical properties, thermal aging resistance, low temperature resistance, flame resistance, abrasion resistance and electrical insulation function.  
Read More
ECOPOWER Petroleum Resin
HC-5090 Low-Temp Tacky C5 Resin
HC-5090: styrene-modified C5 resin, high tack at –20 °C, gel-free with NR/SIS/SBS/EVA, SP 90 °C, low VOC, one resin for both PSA and EVA-HMA.
Read More
Get In Touch .
Get In Touch

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

Home

Products

Email

whatsapp