In recent years, with the continuous optimization of related production technologies, my country's C5 petroleum resin production capacity and output have achieved growth. At this stage, my country's C5 petroleum resin production capacity has reached 550,000 tons/year. The activity and selectivity of hydrogenation catalysts determine the performance of C5 petroleum resin products. With the expansion of downstream application fields of C5 petroleum resins, the market demand for C5 petroleum resins is gradually increasing. Under this background, high-quality, high-performance hydrogenation catalysts demand Release, high-end C5 petroleum resin hydrogenation catalyst has become the key direction of industry research.   Historically, domestic petroleum resins are mostly non-hydrogenated resins. However, with the improvement of domestic raw material quality, process improvement and continuous maturity of technology, there are many sets of hydrogenated resin units planned to be put into operation in the future, which will make resin products or leap into one. new level. The development of the world economy and the accelerated pace of infrastructure construction in emerging economies will further increase the demand for petroleum resins.

Tetraethyl Orthosilicate - from Aerogel Silicon Sources to Electronic Special Gas Materials   Ethyl silicate is also known as tetraethyl silicate and tetraethoxysilane. Colorless transparent liquid with special odor. It is stable in the presence of anhydrous, decomposes into ethanol and silicic acid in case of water, becomes turbid in humid air, and dissolves in organic solvents such as alcohol and ether. Toxic and highly irritating to human eyes and respiratory tract. It is obtained by distillation after the action of silicon tetrachloride and anhydrous ethanol. It is used to make heat-resistant and chemical-resistant coatings and organic silicon solvents. It can also be used in organic synthesis, basic raw materials for the preparation of advanced crystals, optical glass treatment agents, binders, and insulating materials in the electronics industry.   Ethyl orthosilicate (TEOS), also known as tetraethoxysilane, chemical formula Si(OC2H5)4, is a commonly used silicon source for the preparation of SiO2 aerogels, mainly used as electrical insulating materials, coatings, optical glass treatment agents; also It is used in organic synthesis to manufacture chemical-resistant coatings, heat-resistant coatings, silicone solvents and precision casting adhesives; used as heat-resistant coatings, chemical-resistant coatings, organic synthesis intermediates, etc. In addition, electronic grade TEOS is widely used in chemical vapor deposition process to form silicon dioxide deposition film, so as to block contaminants and impurities from entering semiconductor elements, at the same time, it can produce conductive layer or insulating layer, produce anti-reflection film to improve light absorption, temporarily block Etching etc.

Petroleum resin is a thermoplastic resin produced by cracking C5 olefin in the by-product of ethylene plant as raw material, and it is an oligomer with a relative molecular mass between 300 and 3000. It has excellent properties such as insoluble in water, soluble in organic solvents, acid resistance, alkali resistance, water resistance, chemical resistance and aging resistance. C5 petroleum resin has low production cost and large use. It can be made into block or granular form and used as tackifier in pressure-sensitive adhesives. Hot melt adhesive is an adhesive that is heated and melted to generate fluidity, coated on the object to be bonded, and then solidified and bonded after cooling. It is an industrial adhesive and has a wide range of applications, including: women's sanitary napkins, baby diapers, etc. Disposable hygiene products; carton sealing for food, beverages and beer; woodworking furniture; wireless binding of books; labels, tapes; cigarette filter rods; clothing, adhesive linings, and cables, automobiles, refrigerators, footwear, etc. Hot melt adhesives must be combined with tackifiers to bond firmly. In the past, natural resins such as rosin resin or terpene resin were mostly used as tackifiers, but the price was high and the source was unstable. In recent years, the use of petroleum resins as tackifiers has gradually become dominant. ECOPOWER resin has the characteristics of high peeling adhesive strength, good fast track, stable adhesive performance, moderate melt viscosity, good compatibility with polymer matrix, and low price, and has begun to gradually replace natural resin tackifiers. Below is the product catalog of our C5 resins: C5 Petroleum Hydrocarbon Resin Application Base Polymer Main Content Product Recommended Masking/Packaging Tape NR SIS SBS HC5100 Pressure Sensitive Adhesive NR SIS SBS HC5100, HC5090 HMA EVA HC5100, HC5090 Bookbinding HMA EVA HC5100 Thermoplastic Road Marking Paint FILLERS HC52100, HC52100A Sealants BUTYL RUBBER HC52100, HC5100 Rubber Compounding NR BR SBR DCPD, HC5100, HC52100  

Phosphating treatment is currently the most widely used pre-coating treatment process, but because the phosphating solution contains heavy metal ions such as zinc, nickel, and manganese, as well as phosphate and sodium nitrite, and other restricted emissions, and the treatment temperature is high, Due to the complexity of the harmless transformation process of wastewater and waste residue, its application is facing increasing environmental pressure. Silane treatment technology overcomes the above shortcomings and brings a revolutionary change to the field of pre-coating treatment. The treatment effect of silane pre-treatment technology is already comparable to that of zinc-based phosphating.   ECOPOWER Recommend Product: Silane Coupling Agent Vinyl Silane VTMO Crosile171 Used for Paint and Adhesive   Advantages of Silane Technology 1) The film formed by silane technology can replace the traditional phosphating film. The quality of the phosphating film is usually 2 ~ 3 g/m2, and the quality of the Oxsilan coating film is 0.1 g/m2, the difference is about 20 times, and the unit consumption is greatly reduced. 2) Si-O-Me covalent bond has a strong intermolecular bonding force, so the product is very stable, which can improve the anti-corrosion ability of the product. The corrosion resistance after silane treatment is better than that of zinc phosphating. Compared with zirconium products, its performance is obviously superior. 3) Easy to use and easy to control, the bath liquid is made up of two-component liquid, only need to control pH, activation point and conductivity, no need to control free acid, total acid, accelerator, zinc, nickel like phosphating liquid, manganese content and temperature and many other parameters. 4) Save energy, can operate at room temperature or low temperature, and reduce energy costs. 5) Save electricity, 40% of electricity can be saved due to the reduction of the pump and the reduction of power. 6) The treatment time is short, only half of the phosphating treatment time, so the yield can be increased. 7) Excellent environmental protection performance, no harmful heavy metals, no slag, less waste water discharge, easy treatment, if filters and ion exchangers are installed, it can be used in a closed cycle. 8) Multi-metal treatment process: cold-rolled sheet, hot-dip galvanized sheet, electro-galvanized sheet, coated sheet, aluminum and other sheets can be mixed and processed. 9) The process is simple and the process is short. It can reduce the amount of maintenance, do not maintain the surface adjustment, passivation equipment, and does not need to regularly clean the phosphating tank, pipes and nozzles. 10) Compatible with the original coating process and coating equipment, no need to carry out equipment modification, only need to replace the phosphating liquid, it can be put into production. 11) System length reduction: no surface adjustment and passivation procedures are required, which can shorten the proce...

Silanes are compounds derived from silicon groups and other atoms such as carbon, nitrogen and hydrogen. Silane is used in a variety of industrial and medical applications because it greatly improves wetting properties, compressive strength, shear strength, and more. The fast-growing paint and coating industry is a major market driver. Construction activities in developing regions such as Asia Pacific, Middle East and Africa are increasing, resulting in increasing demand for paints and coatings. In addition, the growing demand from the automotive industry is expected to increase the sales of silane as it is used in plastics on a large scale. The Silane market is geographically segmented into North America, Latin America, Europe, Asia Pacific, and the Middle East and Africa. Asia Pacific dominates silanes due to increased construction activity in the region. In China and India, strong demand from the infrastructure industry has led to strong growth in the construction industry in China and India, thereby increasing the demand for the silane market in the region. High demand from the paint and coating industry in North America is expected to positively impact the demand for the silane market in the region. The European silane market is driven by increasing demand for fuel-efficient vehicles with lower CO2 emissions, which will further increase the demand for composite vehicles. Silane market in Middle East and Africa is expected to increase due to heavy duty paints and coatings activity The floor coatings market in Latin America is expected to grow at a slower rate due to lower commercialization and construction activities and lower demand for silanes in paints and coatings industry.   ECOPOWER Silane Coupling Agent Product List: Liquid Sulfur Silane Solid Sulfur Silane Coupling Agent Vinyl Silane Coupling Agent Amino Silane Coupling Agent Epoxy Silane Coupling Agent Methacryloxy Silane Coupling Agent Basic Monomer of Silane Coupling Agent Silane Oligomer Other Feel free to contact us.    

C5 petroleum resin is widely used in rubber, adhesive, road marking paint, paper making and other industrial fields.   1 Application in adhesives Adhesives are required in the production of hot melt adhesives and pressure-sensitive adhesives, and the addition of C5 petroleum resins to the adhesives can greatly increase the viscosity of the adhesives, such as C5 hydrogenated petroleum resins because of their strong peel adhesion, better fast track and low price, and gradually replace rosin resin and terpene resin, which reduces the cost, so it is used more and more in pressure-sensitive adhesive tapes and pharmaceutical adhesives. ECOPOWER recommendation: HC5100 C5 adhesive resin is an aliphatic resin with low molecular weight and good fluidity. C5 petroleum resin has excellent thermal stability and weather resistance. Low volatility, good viscosity and good compatibility with polymers. High transparency, excellent initial tack. Best initial bond strength and peel strength.   2 Application in road marking paint Hot-melt Road marking paint is mainly used when using road marking paint. Because of its low cost, fast drying, good durability, no solvent and wide application, it has become a popular road marking paint. This hot-melt road sign is mainly made by mixing glass beads, pigments, inorganic fillers, plasticizers and thermoplastic resins, because the addition of petroleum resin makes the road marking paint thermal stability, durability, weather resistance and other properties greatly improved. Enhanced, effectively improving the performance of road marking paint ability. ECOPOWER recommendation: HC52100 Hot melt Road marking paint Resin is not a high molecular polymer, but an oligomer with a molecular weight between 300-3000. It has the characteristics of high acid value, miscibility, water resistance, ethanol resistance and chemical resistance.   3 Application in synthetic rubber Hydrogenated petroleum resins and piperylene petroleum resins are particularly used in rubber processing and production in China. Adding C5 petroleum resin as a tackifier to the production of rubber products can effectively improve the strength and formability of the rubber and improve the quality of the rubber. Especially in the production of butyl rubber inner tube, it can effectively prolong the service life of butyl inner tube by using its characteristics of less interference to vulcanization. ECOPOWER recommendation: HC5090 Styrene modified C5 resin has good viscosity and good solubility to different materials. It has a lower softening point and the polarity of C5 resins.   4 Applications in the paper industry  The sizing agent used in the papermaking process can be replaced by C5 petroleum resin instead of rosin resin. Paper made with sizing agent added with petroleum resin is not suitable for bubbles, and is relatively smooth and easy to print. However, maleic anhydride should be added when the sizing agent is prepared from petroleu...

C5 petroleum resin has low production cost and large use. It can be made into block or granular form and used as tackifier in pressure-sensitive adhesives. Hot melt adhesive is an adhesive that is heated and melted to generate fluidity, coated on the object to be bonded, and solidified and bonded after cooling.   EVA has excellent adhesion, softness, heating fluidity and cold resistance, its cohesion is large, the melting surface tension is small, and it has adhesion to almost all substances, chemical resistance, thermal stability, weather resistance and electrical properties. Excellent, widely used in book binding, wood processing, plywood production, packaging, canning, shoemaking, etc. Usually, the hot melt adhesive with EVA as the base material needs to be blended with two or more grades of EVA as the base material. In addition to petroleum resin, inorganic fillers, antioxidants, and pigments can also be added according to user needs, such as: TiO2, carbon black, etc. Petroleum resin has good compatibility with EVA with low VA (vinyl acetate) content, but has poor compatibility with EVA with high VA content.   The preparation process of this hot-melt adhesive is as follows: add EVA, talc, and antioxidant 1010 to the reaction kettle in sequence in a certain proportion, heat to melting, stir vigorously and raise to a certain temperature, then add tackifier petroleum resin, stir for a period of time in the molten state, and then add DOP (dioctyl phthalate) to adjust the viscosity to moderate. At this time, the system is in a uniform and viscous molten state. After cooling, a yellow solid is obtained, which is a hot melt adhesive.

ECOPOWER participated in the China COATU INNOVTE SUMMIT exhibition in 2022. Participate in the coating exhibition to learn more about industry information. I hope we can conduct better cooperation through better communication. ECOPOWER has been providing high-quality Resin and silane products in the coating industry. We regularly participate in the exhibition every year, so that more customers can find us and join the ECOPOWER

From the perspective of market trends, with the growth and maturity of emerging markets such as new energy vehicles, composite materials, and surface treatment, the per capita consumption of functional silanes in my country is still lower than that of developed countries. In the future, sales of functional silanes will continue to grow. The speed remains stable. It is estimated that by 2023, the total production capacity of functional silane will reach 564,000 tons, the total output will reach 389,000 tons, and the consumption will reach 278,000 tons in the same period.   From the perspective of product trends, after years of development, the variety, quality and output of Functional Organosilane in my country have made great progress. With the rapid development of emerging industries such as solar energy, lithium batteries, LED lamps, and 5G networks, the demand for additives in sealants and adhesives is also increasing. For example, in room temperature vulcanized silicone rubber, the demand for neutral rubber is growing rapidly, the deketoxime type rubber has become the mainstream of the market, and the acid type rubber is shrinking. The future development of neutral rubber will be a general trend. In addition, the development of domestic conventional functional silanes is very rapid, but the development of high-end functional silanes is still significantly different from that of foreign countries. In the future, my country's functional silanes will develop in the direction of high-end, specialization and novelty.   From the perspective of competitive trends, in recent years, the functional silane industry has experienced significant consolidation after explosive growth. Some small enterprises have withdrawn one after another, and production capacity tends to be concentrated in large enterprises. At the same time, under the background of stricter safety and environmental protection requirements and continuous advancement of supply-side reforms, silane enterprises will develop in the direction of scale, integration and regionalization.   In 2022, ECOPOWER plans to produce 7000T/Y of new functional organosilane products. If you need more information. Please contact us: sale@ecopowerchem.com, information@ecopowerchem.com