WhatsAppWhatsapp us

Disproportionate Rosin RC 101

Disproportionated rosin (DPR) is compound of dehydroabie acid and dihydroabtice acid, the DPR is processed through catalytic reaction of gum rosin on proper temperature. In the synthetic rubber industry, DPR is used as emulsifier in the producing of various products including styrene-butadiene rubber, chloroprene rubber, acrylonitrile-butadiene rubber and acrylonitrile-butadiene-styrene rubber. Using DPR as an emulsifier, rubber product will improve in cohesion, and the endurance to heat will increase for 25%. The endurance to both abrasion and laceration of this rubber is better than ordinary styrene-butadiene rubber. The cohesion will be greatly enhanced if blended with natural rubber.

  • Item NO.:

    DPR RC 101
  • EINECS No.:

    232-475-7
  • CAS No.:

    8050-09-7
  • Color Gardener:

    Light Yellow
  • Property:

    DPR can be also used for important component of potassium soaps which serve as emulsifiers to improve and strengthen the quality of synthetic rubbers, a raw material for making adhesives, water-based PSA, pigment.

Disproportionate Rosin RC 101

CAS: 8050-09-7 EINECS: 232-475-7 HS.CODE: 380610

 

Chemical Properties

Disproportionated rosin (DPR) RC 101 is compound of dehydroabie acid and dihydroabtice acid, the DPR RC 101 is processed through catalytic reaction of gum rosin on proper temperature. In the synthetic rubber industry, Disproportionated rosin DPR RC 101 is used as emulsifier in the producing of various products including styrene-butadiene rubber, chloroprene rubber, acrylonitrile-butadiene rubber and acrylonitrile-butadiene-styrene rubber.

Using DPR as an emulsifier, rubber product will improve in cohesion, and the endurance to heat will increase by 25%. The endurance to both abrasion and laceration of this rubber is better than ordinary styrene-butadiene rubber. The cohesion will be greatly enhanced if blending with natural rubber.

DPR RC 101 can be also used for important component of potassium soaps which serve as emulsifiers to improve and strengthen the quality of synthetic rubbers, a raw material for making adhesives, water-based PSA, pigment, and chewing gum.

 

Specifications

Test Items

RC 101

Colour

2-4

Abietic Acid, %

≤0.5

Dehydroabietic Acid, %

≥45

Softening Point, R&B, °C

75 min

Acid Value, mg KOH/g

155.0 min

Unsaponifiable Material, %

≤5.0

 

Application

  • Chewing gum
  • Important component of potassium soaps which serve as emulsifiers to improve and strengthen the quality of synthetic rubbers
  • Material for soldering fluxes
  • Pigment
  • Raw material for making adhesives
  • Water-based PSA

 

Storage

  • Avoid contact with light
  • Keep separated from incompatible substances
  • Store and handle in accordance with all current regulations and standards
  • Store in a cool, dry place
  • Store in a tightly closed container

Disproportionate Rosin RC 101

1.Packing: 225kg/ galvanized iron drums or 25kg/bag

2. Storage: Kept in a low temperature, dry and ventilated place, avoid direct sunlight.

3. Shelf life: One year in ventilating, cool and dry area.

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.
Related Products
Potassium Soap of Disproportionated Rosin
Potassium Soap of Disproportionated Rosin DRS K 80
Potassium Soap of Disproportionated Rosin is produced by disproportionated rosin reacting with Potassium hydroxide.
Read More
ECOPOWER Cold Polymerization Performance C9 Petroleum Resin
HC 9120 Good Solubility and Light Color C9 Petroleum Resin for Adhesive
C9 HC 9120 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin. Cold polymerized petroleum resin HC 9120 is prepared by low temperature catalytic polymerization of C9 fraction,which is a byproduct of ethylen plant.  HC 9120 is a yellow granular solid, transparent and glossy, with good solubility, mutual solubility, water resistance, insulation, excellent chemical stability to acid and alkali, good adhesion and low thermal conductivity.  
Read More
ECOPOWER Maleic Modified Rosin
Maleic Modified Rosin Ester Resin for Hotmelt Adhesives Improve Bonding Force
Rosin modified maleic anhydride resin is a slight yellow transparent solid, which is adducts of gum rosin and maleic anhydride through the esterification by glycerol or pentaerythritol.   
Read More
China Best Liquid C5 Hydrocarbon Resin HC-L10 Supplier
Liquid C5 Hydrocarbon Resin HC-L10
Liquid C5 Hydrocarbon Resin HC-L10 is a low-colour, narrow-distribution liquid C5 resin that markedly reduces hot-melt viscosity while imparting excellent low-temperature tack and holding power; it is ideal for labels, protective films and EVA adhesives, compatible with numerous polymers and free from plasticizer-oil migration.
Read More
Polysilicate Silicate SK-56 – Self-Cleaning & Anti-Fog Additive for Glass, Metal, and Building Coatings
Polysilicate Silicate SK-56
Polysilicate Silicate SK-56 is a clear, hydrophilic additive designed for self-cleaning and anti-fog coatings. It provides durable surface protection and long-lasting clarity for glass, metal, and building materials.  
Read More
ECOPOWER Hydrocarbon Resin
HC5100 Aliphatic Hydrocarbon Resin C5(Rubber Grade)
HC5100 is a light-colored C5 hydrocarbon resin with a softening point around 100 °C; it exhibits excellent compatibility with NR, SBR and BR. Adding 3–8 phr during rubber compounding markedly improves tack, green strength and elongation without affecting cure rate, making it a highly efficient, eco-friendly tackifier for tires, shoe soles and conveyor belts.
Read More
Methacryloxy Silane
Methacryloxy Silane Crosile® 570(MAPTMS)
Crosile®570 is 3-Methacryloxypropyltrimethoxysilane(MAPTMS). It is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker.  
Read More
ECOPOWER Conventional Silica
Felcosil-165 Amorphous Precipitated Silica for Rubber
Precipitated silica Felcosil-165, a form of synthetic amorphous silicon dioxide, is derived from quartz sand, a crystalline form of silicon dioxide. The physical properties of precipitated silica can be manipulated during the manufacturing process to deliver products with a wide range of performance-enhancing features engineered for many different end-use applications.
Read More
Get In Touch .
Get In Touch

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

Home

Products

Email

whatsapp