Vinyl Silane Coupling Agent Crosile® 151 Vinyltrimethoxysilane

Crosile® 171 Vinyltrimethoxysilane (VTMO) is a silane coupling agent with a Vinyl and hydroxyl groups that can be used to enhance the wettability and improve the superhydrophobic characteristics of different composites.  

ECOPOWER Crosile® 172 is a vinyl group and a hydrolyzable 2-methoxy-ethoxy-Silyl group that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products’ mechanical and electrical properties to heat and/or moisture.

Crosile® 171, Crosile® 151, Crosile® 172, as well as Crosile® 173 are highly effective compounds that offer a wide range of benefits when used to modify various polymers. Whether you need to enhance mechanical strength, adhesion, or weather resistance, these compounds are the ideal choice for achieving outstanding results.

ECOPOWER Crosile® 173 Vinyltriisopropoxysilane is a silane coupling agent with a Vinyl and hydroxyl groups that can be used to enhance the wettability and improve the superhydrophobic characteristics of different composites.  

ECOPOWER HC 9130 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic polymerization technique. C9 petroleum resin HC 9130 with the molecular weight is among 300-3000. Generally speaking, this kind of resin isn’t used singly, but can be used with other resins such as accelerant, regulator, and modifier. HC 9130 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

Disproportionated rosin (DPR) is compound of dehydroabie acid and dihydroabtice acid, the DPR is processed through catalytic reaction of gum rosin on proper temperature. In the synthetic rubber industry, DPR is used as emulsifier in the producing of various products including styrene-butadiene rubber, chloroprene rubber, acrylonitrile-butadiene rubber and acrylonitrile-butadiene-styrene rubber. Using DPR as an emulsifier, rubber product will improve in cohesion, and the endurance to heat will increase for 25%. The endurance to both abrasion and laceration of this rubber is better than ordinary styrene-butadiene rubber. The cohesion will be greatly enhanced if blended with natural rubber.

Hydrogenated dicyclopentadiene resins affect adhesive performance when used as tackifiers in styrene-block-copolymer-based hot-melt pressure-sensitive adhesives.

Dilute organic silicon adhesive and pressure-sensitive adhesive main agents with solvents, then stir while adding Crosile® 6296. Do not directly mix it with platinum catalyst under any circumstances.